PORSCHE 930 EXHAUST HEADERS
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
Fabspeed's performance package for the 991 Carrera vehicles saves 11.45+ pounds from the vehicle and improves exhaust flow and power by replacing the factory headers, center muffler, side mufflers, and air box.
Fabspeed's 991 Carrera performance package replaces the restrictive OEM side mufflers and center muffler for a deeper, throatier exhaust note and improved power and throttle response. the included sport headers replace the restrictive factory headers and cats with high-flowing performance headers and 200-cell hjs sportcats. lastly, the restrictive factory airbox is replaced by fabspeed's carbon fiber competition intake system which increases the cold air flow into the engine for better power a...(choose a part on the right to read more)
General Fitment 911 2009-12
$9,227.59
Make a selection
Product details:
Full exhaust system developed for track use provides an aggressive exhaust note while adding horsepower, torque, and throttle response; available as single or dual outlet and with or without heat exchange.
Features:
-fits all Porsche 993 Carrera vehicles (1994-1998)
-loud and aggressive cup car sound. Recommended for track use only.
-this system can be ordered in single- or double- outlet form; cap is provided for single-outlet use. Please specify.
-maintain your factory in-cabin heat with the optional heat exchange on the headers. Please specify.
-saves 43 from the rear of the vehicle when configured with heat option and saves 47 when config...(choose a part on the right to read more)
General Fitment 911 1994-98
From $2,795.00
Make a selection
Product details:
High-quality performance headers provide better boost response and power throughout the rpm range.
Features:
-fits all 993 turbo / turbo s vehicles (1995-1998)
-increases horsepower by 15 whp and improves throttle response
-saves 9 lbs from the rear of the vehicle
-available with or with out heat exchange
-features high velocity 3-into-1 pyramidal inverted cast merge collectors for improved exhaust scavenging.
-constructed from high-quality 14-16 gauge c.n.c. Mandrel-bent t304l stainless steel for optimum flow and maximum durability
-all fabspeed performance products are backed by the fabspeed lifetime ...(choose a part on the right to read more)
General Fitment 911 1994-98
From $1,695.00
Make a selection
Product details:
Complete high-performance exhaust solution for the Porsche 993 turbo; fantastically daily drivable sound and power from fabspeed's supercup exhaust system, sportcat x-pipe, sport headers with heat, cup high performance air box cover, bmc f1 air filter and ecu tuning upgrade.
Includes:
993 turbo supercup exhaust system incl. Deluxe oval style tips
993 turbo sport cat x-pipe
993 turbo sport headers with heat
993 turbo cup high performance air box cover
993 turbo bmc f1 air filter
993 turbo ecu tuning upgrade
Features:
-fits all Porsche 993 turbo / turbo s vehicles (1995-1998)
-constructed from t304 stainless steel, c.n.c. Mandrel bent tubing for maxim...(choose a part on the right to read more)
General Fitment 911 1994-98
From $7,750.00
Make a selection
Fabspeed's complete high performance exhaust solution is a fantastic daily driveable sound and power; from fabspeed's supercup exhaust system, sportcat x-pipe, sport headers with heat, cup high performance air box cover, bmc f1 air filter and ecu tuning upgrade.
Features:
Constructed from high quality t304 stainless steel cnc mandrel bent primary tubes for maximum power and exotic sports car sound
General Fitment 911 1994-98
$10,580.63
Make a selection
Product details:
Equal-length headers provide improved torque and equalized engine pulsing thanks to industry-exclusive mandrel-bent primary tubes, gaskets included.
Features:
-fits all Porsche 996 Carrera vehicles 1998-2005
-improves horsepower and torque by 15 whp and 12 ft-lbs
-saves 2 lbs from the rear of the vehicle
-one piece cnc mandrel-bent primary tubes provide maximum uninterrupted flow
-f1-style merge collectors provide optimized exhaust scavenging
-improves power and torque throughout the rpm range
-direct replacement for the factory headers
-simple diy bolt-on installation
-all fabspeed performance products are backed by the fabspeed life...(choose a part on the right to read more)
General Fitment 911 GT3 2003-05 911 1998-05
From $1,595.00
Make a selection
Fabspeed's 996 Carrera performance package replaces the restrictive OEM mufflers and factory cats with high-performance mufflers and 200-cell hjs sportcats for a deeper, throatier exhaust note and improved power and throttle response. the included performance headers replace the restrictive factory headers and with high-flowing motorsport headers. lastly, the restrictive factory airbox is replaced by fabspeed's carbon fiber competition intake system which increases the cold air flow into the engine for better power and sound.
Includes:
Maxflo performance mufflers
General Fitment 911 1998-05
$8,839.13
Make a selection
Product details:
Complete high-performance exhaust & intake solution for the 996 Carrera; includes maxflo performance exhaust, sportcat x-pipe, performance headers, competition intake, evomsit ecu tune & deluxe quad-style tips.
Fabspeed’s 996 Carrera performance package replaces the restrictive OEM mufflers and factory cats with high-performance mufflers and 200-cell hjs sportcats for a deeper, throatier exhaust note and improved power and throttle response. the included performance headers replace the restrictive factory headers and with high-flowing motor sport headers. lastly, the restrictive factory airbox is replaced by fabspeed’s carbon fiber competition intake sys...(choose a part on the right to read more)
General Fitment 911 1998-05
$7,795.00
Make a selection
Product details:
A great option for track-oriented Carreras; cat-less design for optimum flow and maximum power (recommended for track/off-road use only).
Features:
-fits all Porsche 997.2 Carrera vehicles 2009-2011
-saves 8 lbs from the rear of the vehicle
-recommended for track and off-road use only
-includes gaskets for a leak-free seal
-constructed from 14-16 gauge t304l stainless steel
-cnc mandrel-bent primary pipes for maximum horsepower & torque
-3-into-1 high velocity f1/nascar-style merge collector for improved exhaust scavenging
-direct bolt-on replacement for the OEM headers
-compatible with OEM center muffler or fabsp...(choose a part on the right to read more)
General Fitment 911 2009-12
From $1,995.00
Make a selection
Brombacher racing exhaust system for 997gt3/rs
Facts:
- + 25 crank hp & + 25 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 42 lbs. (23 kg)
- 44.5 lb (19 kg) savings over stock system!
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brakets
- made in Germany
- 108 db
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary
The FVD GT3 race exhaust gives the 997 GT3 a more pronounced, aggressive sound similar to the 997 cup c...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$6,996.00
Make a selection
Complete high-performance exhaust & intake solution for the 997.2 turbo.
Includes:
997.2 turbo/turbo s supersport x-pipe
997.2 turbo/turbo s sport headers
997.2 turbo/turbo s sport catalytic converters
997.2 turbo/turbo s deluxe quad style tips - polished chrome or black chrome
997.2 turbo/turbo s competition air intake
Features:
Fits all Porsche 997.2 turbo / turbo s vehicles (2010-2012)
Dramatic improvement in sports car sound and power throughout the rpm range
Includes high performance 200-cell hjs sport catalytic converters for improved flow and exhaust sound
Constructed from high-quality 14-16 gauge c.n.c. Mandrel-bent t304l stainless steel for optimum flow and maximum durability
Sp...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2010-13 911 2009-12
From $6,750.00
Make a selection
Product details:
Fabspeed's equal-length 997 sport headers provide improved torque and equalized engine pulsing thanks to cnc mandrel-bent primary tubes.
Features:
-fits all Porsche 997 Carrera vehicles 2005-2008
-improves horsepower and torque by 15 whp and 12 ft-lbs
-saves 2 lbs from the rear of the vehicle
-one piece cnc mandrel-bent primary tubes provide maximum uninterrupted flow
-f1-style merge collectors provide optimized exhaust scavenging
-direct replacement for the factory headers on all 997 Carreras
-simple diy bolt-on installation
-all fabspeed performance products are backed by the fabspeed lifetime limited warranty
General Fitment 911 2005-08
From $1,595.00
Make a selection
Product details:
Direct replacement for the restrictive OEM headers, offering improved power and throttle response throughout the rpm range.
Features:
-fits all Porsche 997 GT3 / GT3 rs vehicles 2006-2009
-includes German-made 200 cell high performance hjs tri-metallic sport catalytic converters
-constructed from high-quality 14-16 gauge, c.n.c. Mandrel-bent stainless steel
-sport headers include 200 cell hjs high flow catalytic converters
-high velocity 3-into-1 pyramidal investment case merge collectors for improved exhaust scavenging
-all fabspeed performance products are backed by the fabspeed lifetime limited warranty
Note: fabspeed’s...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
From $2,995.00
Make a selection
To achieve a louder and higher pitched exhaust sound with every kreissieg exhaust system, youll find that their stainless headers are a recommended installation. These stainless headers were carefully developed along with each exhaust system to provide optimal performance.
Kreissieg strongly recommends these headers when you purchase one of their exhaust systems to get the best experience possible.
Made from stainless steel material
Note: kreissieg can not guarantee "no cel" with this unit because every car has different emission specs depending on country.
*every kreissieg exhaust system is built to order specifically to each customers request and each handcrafted system takes 14-...(choose a part on the right to read more)
General Fitment 911 1998-05
$4,911.93
Make a selection
These headers are meant to replace the original 993 GT2 r (993 111 039 83) headers that are no longer available. They will reduce turbo lag and add horsepower and torque. Made of t316 stainless. Primaries are 42mm (1.65 ). Merge into a 50mm (2 ) motorsports collector. Manufactured by m&m exhaust in Germany.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
$1,835.90
Make a selection
Fabspeed's performance package for the Porsche 997 turbo offers massive increases in horsepower and torque by 74 whp and 78 ft-lbs of torque.
This is a complete high performance exhaust and intake solution that includes maxflo performance mufflers (includes sport catalytic converters), sport performance headers, deluxe quad style tips, and competition air intake.
Features:
Sound level: mild
General Fitment 911 TURBO/GT2 2007-09
$8,714.59
Make a selection
High-quality performance headers provide better boost response and power throughout the rpm range
Features:
Fits all Porsche 997 turbo vehicles (2006-2009)
Improves power and throttle response
High-velocity 3-into-1 merge collectors for maximum performance
Equal-length tubing for improved exhaust travel
Constructed from high-quality 14-16 gauge c.n.c. Mandrel-bent t304l stainless steel for optimum flow and maximum durability
Direct replacement for the restrictive OEM headers
Reuse of factory OEM header gaskets is required.
All fabspeed performance products are backed by the fabspeed lifetime limited warranty
General Fitment 911 2005-08 911 TURBO/GT2 2007-09
From $1,595.00
Make a selection
These headers are meant to replace the original 993 GT2 r (993 111 039 83) headers that are no longer available. They will reduce turbo lag and add horsepower and torque. Made of t316 stainless. Primaries are 42mm (1.65 ). Merge into a 50mm (2 ) motorsports collector. Manufactured by m&m exhaust in Germany.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
$1,835.90
Make a selection
Race exhaust system - 2 x header system 42mm - 1 x tube set - 1 x muffler - 1 x hardware kit
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 1970-73
From $3,875.30
Make a selection
Combined with our proprietary software and exhaust (including sport cats) you can achieve 720 crank hp (720 ps) and 693 crank lb.-ft. (940 nm) of torque!
Turbo facts:
- increased velocity & reduced backpressure manifold (header) is included for plug and play installation.
- new, lightened and larger compressor wheels for up to 45% more power than OEM turbo power.
- housings are larger for higher flow and reduced backpressure.
- extremely high quality, German made turbos ensure years of trouble free operation.
- brand new turbos, not remanufactured.
- free software update included for those already running FVD software.
Our turbos are built for every day drivability and reliability that you expect ...(choose a part on the right to read more)
General Fitment PANAMERA 2010-14
$12,575.38
Make a selection
Kit includes:
Software ecu software (flashclient cable), sport air filter and sport header system.
Some models require oxygen sensor relocation.
Genuine:
Engine - 6 cylinder boxer
Capacity - 3179ccm
Compression ratio - 11,0:1
Max. Power - 185kw (252hp) @ 6250rpm
Max. Torque - 305nm (225lbf ft) @ 4500rpm
Max. Speed - 260km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 5.6s
Tuning:
Max. Power - 200kw (272hp) @ 6400rpm
Max. Torque - 335nm (247lbf ft) @ 4900rpm
Max. Speed - 270km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 5.3s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche eng...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,747.90
Make a selection
Kit includes:
Software dme, power-flow kit, sport header system, sportmuffler.
Please note: this dme cannot be flashloaded. Dme must be sent to us.
Some models require oxygen sensor relocation.
Genuine:
Engine - 6 cylinder boxer
Capacity - 2480ccm
Compression ratio - 11,0:1
Max. Power - 150kw (204hp) @ 6000rpm
Max. Torque - 245nm (181lbf ft) @ 4500rpm
Max. Speed - 240km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 6.9s
Tuning:
Max. Power - 169kw (230hp) @ 6000rpm
Max. Torque - 280nm (207lbf ft) @ 5500rpm
Max. Speed - 255km/h
Max. Rpm - 6900rpm
Acceleration 0-100km/h - 6.4s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. ...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$4,261.40
Make a selection
Kit includes:
Software ecu software (flashclient cable), power-flow kit, sport header system, sportmuffler (2x90mm tips).
Some models require oxygen sensor relocation.
Genuine:
Engine - 6 cylinder boxer
Capacity - 2687ccm
Compression ratio - 11,0:1
Max. Power - 162kw (220hp) @ 6400rpm
Max. Torque - 260nm (192lbf ft) @ 4750rpm
Max. Speed - 250km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 6.6s
Tuning:
Max. Power - 184kw (250hp) @ 6500rpm
Max. Torque - 300nm (221lbf ft) @ 5000rpm
Max. Speed - 265km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 6.1s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$3,861.00
Make a selection
+140 crank hp & +155 crank tq gain on the turbo and +100 crank hp & +126 crank tq gain on the turbo s. All while offering ultra-smooth drivability and reliability that you expect from your Porsche. Package includes: - FVD my genius handheld flash tool (included). - FVD tuning software FVD99161840mg. - bmc sport filter 47079801. - FVD sound version valved muffler with 200 cell hjs tri-metallic cats bes99120240skhd. - valve control module with remote control beskls001001. - FVD headers bes99101040s. - FVD exhaust installation kit (everything needed for simple installation). FVD software power gains: max. Power - 485 kw (660 hp) @ 6500rpm max. Torque - 870 nm (642 lb.-ft.) @ 3750rpm max. Speed - 330km/h (206 mph) ...(choose a part on the right to read more)
$13,664.05
Make a selection
Kit includes:
Ecu software (flashclient cable), sport air filter, headers, 200 cell catalytics,sport center muffler.
Genuine:
Engine - 6 cylinder boxer
Capacity - 3387ccm
Compression ratio - 11,1:1
Max. Power - 217kw (295hp) @ 6250rpm
Max. Torque - 340nm (251lbf ft) @ 4400-6000rpm
Max. Speed - 275km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 5.4s
Tuning:
Max. Power - 235kw (320hp) @ 6500rpm
Max. Torque - 365nm (269lbf ft) @ 5000-5500rpm
Max. Speed - 280km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/h - 5.0s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to ou...(choose a part on the right to read more)
General Fitment CAYMAN 2006-08
$8,611.90
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|